Elevadores Turismos y Camiones
Elevador Doble Tijera
Elevador Tijera
Elevador electromecánico 2 col.

Power Lift HDL 6500 SST DG

Hydraulic 2-post lift with double jointed arms

Power Lift HDL 6500 SST DG

Código No:HDL265.0041020D-7016
Power Lift HDL 6500 SST DG
2 post lift Power Lift HDL 6500 DG f RAL7016 grey
2 post lift Power Lift HDL 6500 DG s NB RAL7016 grey
cotejar
Breve descripción
Código No: HDL265.0041020D-7016
Capacidad elevación: 6500 kg
Tipo 2 post lift
Color Grey
Händler in Ihrer Nähe 20 Nicht Ihre Postleitzahl? hier eingeben

Nussbaum Automotive Lifts, Inc.

177 Defense Highway Suite 7, Annapolis
Maryland 21401

https://

Power Lift HDL 6500 SST DG

The hydraulic 2-post lift Power Lift HDL 6500 SST DG with a load capacity of 6500 kg and equipped with double jointed arms is a lift with high lifting capacity and flexibility for the versatile automotive workshop, that serves all vehicle types, from smallest cars to large vans. The Power Lift HDL 6500 SST DG is equipped with Nussbaum's patented SST technology.

With the symmetrical telescopic double jointed arms you can carry a wide range of vehicle sizes and weight classes from small cars such as Smart up to overlong vans such as Mercedes-Benz Sprinter and VW Crafter with long wheelbase lift. The arms are mounted on roller bearings for comfortable operation and are secured in the set position by a pneumatic locking mechanism. The Power Lift HDL 6500 SST DG offers absolute operating comfort with two operating units (one per column) and two independent hydraulic power packs and can be easily adapted to the needs of the workshop in terms of installation width and height during installation.

The Power Lift HDL 6500 SST DG is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

  • Load capacity: 6500 kg
  • The easy-to-use double-joint arms on roller bearings reach all the support points specified by the vehicle manufacturers
  • Two operating units, two hydraulic power packs
  • Operating units with clear electronic display
  • Installation width and height are flexible
  • High safety: Mechanical locking at any lifting height
  • Low maintenance (no ropes, no ratchets)
  • Developed and manufactured in Germany
  • Recommended by Mercedes-Benz (for similar lift HDL 2.65 SST DG MB)

SST technology

The Safety Star Technology (SST) monitors the synchronism of the two lifting columns to within a tenth of a millimeter. The mechanical interlock locks the support arms automatically at any lifting height when The lift stops. A safety nut on roller bearings slides along the cylinder and locks the lift automatically.

By reducing the number of moving parts in the lift (no synchronous ropes, no safety latch) we have been able to reduce the maintenance effort of the Power Lift HDL 6500 SST DG and thus reduce the running costs in the long run. The two independent hydraulic power packs are safely and space-savingly integrated into the lift. The operating units each have a clearly arranged electronic display. The synchronisation of the two columns can be electronically controlled with the revolutionary SST system with an accuracy of tenths of a millimeter. The columns communicate via an electric cable, eliminating the need to lay hydraulic hoses between the columns. The connecting cable can either be attached to the floor or to the top of the lifting columns via a cable bridge. The columns and arms made of high-quality steel are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and then powder-coated [AttributeShortCode,attribute=Colour name,attributeid=3]. Your lift is thus protected against dirt and weather in the long term. The design, the workmanship and the integrated hydraulic units give the Power Lift HDL 6500 SST DG an elegant overall appearance that unobtrusively supports the professional appearance of your workshop.

Envío

Hebebühne mit zwei Aggregaten, Kabel, symmetrische, 2-fach teleskopierbare, rollengelagerte Doppelgelenktragarme mit pneumatischer Verriegelung, im Tragarm leicht austauschbare Teleskopdrehteller

Instalación

Fundament (min. 250mm / mit Qualität min. C20/25), 14 Dübel BM16-25/100/40 (abhängig vom Fundament, siehe Prüfbuch), 2 x 17 Liter Hydrauliköl HLP ISO 32, Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftversorgung 6-10 bar, Entl

Detalles
Capacidad 6500 kg
RAL color RAL 7016
Recubrimiento
Altura de recogida min 147 - 222 mm
Altura de recogida min 147 - 222 mm
Tiempo ascenso 70 sec
Tiempo descenso 55 sec
Altura elevación max. 2127 mm
Altura total min 4540 - 4990 mm
Altura Columna 4419 mm
Altura de paso min 4545 - 4995 mm
Ancho total min 3570 - 3770 mm
Ancho recomendado instalación 3570 mm
Ancho instalación min. 3570 mm
Ancho de paso min 2513 mm
Ancho de paso entre columnas min 2765 mm
Ancho de paso entre columnas con los carros de elevación min 2376 mm
Distancia libre entre columnas min. 2766 mm
Potencia motor por columna 1,5 KW
Dispositivo de recogida
Sistema Sincronización
Oil quantity (approx.) 34 liter
Alimentación eléctrica (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Protección Fusible
Longitud cimentación 1650 mm
Ancho cimentación 4370 mm
Grossor cimentación 250 mm
Calidad cemento C20/25
Número arancel aduanero tafífa 84254100

Ficha técnica

Datenblatt 141 KB

Diagramas fuerzas

ProductDataTabs
Kräfteplan 80 KB

Modelos de perforación

Dübelbohrbild 28 KB

Modelos de elevación

Aufnahmematrix 507 KB
Aufnahmematrix 195 KB
Aufnahmematrix 258 KB

Libro de Inspección

HDL 6500 7000 8000 SST DG V3 1 DE EN FR ES IT 14 MB

Catálogos

Power Lift HL HDL SST Brochure - English 2.4 MB
Power Lift HL HDL SST Panfleto - Español 2.4 MB
Power Lift HL HDL SST Brochure - Français 2.4 MB
Power Lift HL HDL SST Broschüre - Deutsch 2.4 MB
Power Lift HL HDL SST Prospetto - Italiano 2.4 MB
1
Embalaje
Dimensiones producto 3100mm x 1000mm x 1100mm
Peso Total 950kg
Apilable No apilable
2
Embalaje
Dimensiones producto 3100mm x 1000mm x 1100mm
Peso Total 950kg
Apilable No apilable
Adapter set for transporter (Trapo) adjustable 180 - 286 mm, set = 4 pieces. Código No: 250SL08130S
Adjustable top set 115-220 mm, set = 4 pieces. Código No: 235TTKAS08501
Adjustable top set 231-330 mm, set = 4 pieces. Código No: 235TTKAS08809
Attachment set for MB 100, adjustable 150-255 mm, set = 4 pieces. Código No: 235TTKAS08537
Attachment set for Sprinter (NCV3) with fixing pin for front attachment points, adjustable 230-335 mm, set = 2 pieces. Código No: 235TTKAS08870
Attachment set for Sprinter (NCV3) with prism for rear mounting points, adjustable 225-330 mm, set = 2 pieces. Código No: 235TTKAS08850
Attachment set rigid, set = 4 pieces. Código No: 250HDL28063

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Automotive Lifts GmbH - Alle Rechte vorbehalten.