Elevadores Turismos y Camiones
Elevador Doble Tijera
Elevador Tijera
Elevador electromecánico 2 col.

Power Lift HF 3S 4000 UNI HSV

Hydraulic 2-post lift with triple safety system and universal arms and column extension

Power Lift HF 3S 4000 UNI HSV

Código No:HLNTK240.0001110D-7016
Power Lift HF 3S 4000 UNI HSV
NB HF 3S 4000 UNI f NB g
NB HF 3S 4000 UNI s NB g
Breve descripción
Código No: HLNTK240.0001110D-7016
Capacidad elevación: 4000 kg
Tipo 2 post lift
Color Grey
Händler in Ihrer Nähe 20 Nicht Ihre Postleitzahl? hier eingeben

Nussbaum Automotive Lifts, Inc.

177 Defense Highway Suite 7, Annapolis
Maryland 21401


Power Lift HF 3S 4000 UNI HSV

The hydraulic 2-post lift Power Lift HF 3S 4000 UNI HSV with a load capacity of 4000 kg and asymmetrical universal arms, the world's only lift with a triple safety system. The Power Lift HF 3S 4000 UNI HSV is the ideal lift for daily continuous use in a consistently busy garage where only the best is good enough. With their fast lifting and lowering times, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.

With the universal arms consisting of a long single telescopic arm and a short double telescopic arm you can lift a wide range of vehicle sizes and weight classes from Smart to Mercedes Sprinter and VW Crafter with long wheelbase.

The Power Lift HF 3S 4000 UNI HSV is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies ausgestattet and is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

  • Lifting time: 26 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 4000 kg
  • Triple safety: Two redundant hydraulic circuits plus Automatic safety latch (no clacking during lifting and lowering)
  • Universal arms reach the mounting points of a wide range of vehicle sizes
  • Adjustable in width and height (with optional column extension)
  • Compressed air connection and 220 V socket integrated in column
  • High quality: Every power unit and every hydraulic cylinder is tested before shipment
  • Developed and manufactured in Germany

The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort anbieten. The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.

The Power Lift HF 3S 4000 UNI HSV is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants:  Mit a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm and thanks to the optional riser pipe extensions the Power Lift HF 3S 4000 UNI HSV can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently powder-coated. Your lift is thus protected against dirt and weather in the long term.

The design and the processing of the Power Lift HF 3S 4000 UNI HSV give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 2050 mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.


Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert


Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung

Capacidad 4000 kg
RAL color RAL 7016
Altura de recogida min 115 - 190 mm
Altura de recogida min 115 - 190 mm
Largo min. brazo delantero 570 - 1160 mm
Largo min. brazo trasero 1130 - 1840 mm
Tiempo ascenso 26 sec
Tiempo descenso 14 sec
Altura elevación 2050 mm
Altura total min 4109 - 4909 mm
Altura Columna 4109 mm
Altura de paso min 4109 - 4909 mm
Ancho total min 3150 - 3350 mm
Ancho recomendado instalación 3350 mm
Ancho instalación min. 3150 - 3350 mm
Ancho de paso min 2566 - 2766 mm
Ancho de paso entre columnas min 2566 - 2766 mm
Ancho de paso entre columnas con los carros de elevación min 2322 - 2522 mm
Distancia libre entre columnas min. 2566 - 2766 mm
Dispositivo de recogida
Sistema Sincronización
Oil quantity (approx.) 13 liter
Alimentación eléctrica (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Protección Fusible
Potencia Motor 3 KW
Noise level (<=) 70 db
Longitud cimentación 1600 mm
Ancho cimentación 3750 mm
Grossor cimentación 200 mm
Calidad cemento C20/25
Número arancel aduanero tafífa 84254100

Ficha técnica

Datenblatt 211 KB


Fundamentplan 48 KB
Blockfundamentplan 55 KB

Modelos de elevación

Aufnahmematrix 573 KB

Libro de Inspección



Power Lift HF 3S Prospetto - Italiano 2.1 MB
Power Lift HF 3S Broschüre - Deutsch 2.1 MB
Dimensiones producto 4120mm x 800mm x 600mm
Peso Total 700kg
Apilable 3 veces

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Automotive Lifts GmbH - Alle Rechte vorbehalten.