Elevadores Turismos y Camiones
Elevador Doble Tijera
Elevador Tijera
Elevador electromecánico 2 col.

Power Lift HF 3S 3500 DT

Hydraulic 2-post lift with triple safety system and double telescopic arms

Power Lift HF 3S 3500 DT

Código No:HLNTK235.0000120D-7016
Power Lift HF 3S 3500 DT
NB HF 3S 3500 DT f NB g
NB HF 3S 3500 DT s NB g
Personalizado cotejar
Breve descripción
Código No: HLNTK235.0000120D-7016
Capacidad elevación: 3500 kg
Tipo 2 post lift
Color Grey

Power Lift HF 3S 3500 DT

The hydraulic 2-post lift Power Lift HF 3S 3500 DT with a load capacity of 3500 kg and asymmetrical double telescopic lifting arms is the world's only lift with triple safety system. The Power Lift HF 3S 3500 DT is the ideal lift for daily continuous use in a consistently busy garage where only the best is good enough. With it's fast lifting- and lowering time, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.

The Power Lift HF 3S 3500 DT is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies and is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

  • Lifting time: 23 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 3500 kg
  • Triple safety: Two redundant hydraulic circuits plus an automatic safety latch (no clacking during lifting and lowering)
  • Adjustable in width and height (with optional column extension)
  • Compressed air connection and 220 V socket integrated in column
  • High quality: Every power unit and every hydraulic cylinder is tested before shipment
  • Developed and manufactured in Germany

The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort . The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.

The Power Lift HF 3S 3500 DT is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants:  Mit a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm and thanks to the optional riser pipe extensions the Power Lift HF 3S 3500 DT can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently grau powder-coated. Your lift is thus protected against dirt and weather in the long term.

The design and the processing of the Power Lift HF 3S 3500 DT give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 2050 mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

Envío

Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert

Instalación

Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung

Detalles
Capacidad 3500 kg
RAL color RAL 7016
Recubrimiento
Ancho recomendado instalación 3230 mm
Altura de recogida min 95 mm
Altura de recogida max 140 mm
Altura de recogida min 95 - 140 mm
Largo min. brazo delantero 570 - 1160 mm
Largo min. brazo trasero 940 - 1495 mm
Distancia libre entre columnas min. 2546 - 2746 mm
Sistema Sincronización
Altura Columna 4040 mm
Altura elevación 2050 mm
Ancho instalación min. 3130 - 3330 mm
Ancho total min 3130 - 3330 mm
Tiempo ascenso 23 sec
Tiempo descenso 14 sec
Altura de paso min 4040 - 4909 mm
Ancho de paso min 2546 - 2746 mm
Ancho de paso entre columnas min 2546 - 2746 mm
Ancho de paso entre columnas con los carros de elevación min 2300 - 2500 mm
Altura total min 4040 mm
Dispositivo de recogida
Oil quantity (approx.) 13 liter
Alimentación eléctrica (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Potencia Motor 3 KW
Protección Fusible
Longitud cimentación 1600 mm
Ancho cimentación 3630 mm
Grossor cimentación 200 mm
Calidad cemento C20/25
Noise level (<=) 70 db
Número arancel aduanero tafífa 84254100

Ficha técnica

Datenblatt 224 KB

Planos

Fundamentplan 48 KB
Blockfundamentplan 55 KB

Modelos de elevación

Aufnahmematrix 163 KB
Aufnahmematrix 98 KB

Libro de Inspección

POWER LIFT HF3S 2xx NT K V10 DE EN FR ES IT 26 MB

Catálogos

Power Lift HF 3S Prospetto - Italiano 2.5 MB
Power Lift HF 3S Broschüre - Deutsch 2.5 MB
Power Lift HF 3S Brochure - English 2.5 MB
Power Lift HF 3S Panfleto - Español 2.5 MB
Power Lift HF 3S Brochure - Français 2.5 MB
1
Embalaje
Dimensiones producto 4120mm x 800mm x 600mm
Peso Total 700kg
Apilable 3 veces
Personalizado

Comentarios

Nadie comentó en esta página todavía.

Publicar su mensaje

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Automotive Lifts GmbH - Alle Rechte vorbehalten.