Power Lift HF 3500 SC

The hydraulic 2-post lift Power Lift HF 3500 SC with a load capacity of 3500 kg extraflat, asymmetrical Sportscar arms is the ideal lift for the demanding automotive workshop, where even very low vehicles can be lifted. The perfect combination of premium hydraulics and mechanical safety, equipped with Nussbaum's patented HyperFlow® technology and a mechanical safety latch, the Power Lift HF 3500 SC guarantees you perfect synchronisation at all times. The extraflat arms with a pickup height of only [Unterschwenkhöhe] mm glide under all low-level vehicles. The Power Lift HF 3500 SC is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

• Lifting time: 33 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
• Load capacity: 3500 kg
• Less wear, less downtime for maintenance thanks to HyperFlow®
• Extra-flat SC arms with a lower swivel height of only 81 - 120 mm
• Automatic safety latch (no clacking during lifting and lowering)
• Guaranteed quality: The hydraulic cylinders are individually tested before dispatch
• Developed and manufactured in Germany

The HF series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifts Made in Germany. Mit unseren specially developed, in-house technologies, we can provide you with an always perfect synchronisation without manual maintenance effort .

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of [AttributeShortCode,attribute=Hubhöhe max.,attributeid=50] mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently blue powder-coated. Your lift is thus protected against dirt and weather in the long term. The design and the processing of the Power Lift HF 3500 SC give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

Envío

Lift with asymmetrical, telescopic arms, four turntables fixed in the arm, energy set: E-Set (230 V/ compressed air) integrated in the operating column

Instalación

Foundation 200mm C20/25 standard reinforcement, 16 dowels BM12-20/80/40 (depending on foundation, see manual), eletric connection 3 PH, N + PE, 400 V, 50 Hz, 16 Amp. slow fuse, Compressed air connection for energy set, Hydraulic Oil HLP32 ca. 10l, Unloading